- Contact Person : Mr. Huang Stanley
- Company Name : Yueqing Chaoke Electric Co., Ltd.
- Tel : 86-577-27885553
- Fax : 86-577-27885554
- Address : Zhejiang,Yueqing,No.36 Pingshan Rd,Liushi,Yueqing ZheJjiang,China 325604
- Country/Region : China
- Zip : 325604
medium voltage switchgear
medium voltage switchgear
Technical requirement
Main circuit rated voltage 400V,690V | ||
Rated frequency 50Hz | ||
Rated insulation voltage 690V(1000V) | ||
Rated current | horizontal bus<=4000 | |
vertical bus<=1000A | ||
Bus-rated short time withstand current(KA/1s) 50,80 | ||
Bus peak withstand current rating(KA/0.1s) 105,176 | ||
The secondary circuit rated voltage | AC220V,400V | |
DC110V,220V | ||
power frequency testing transformer(V/5s) | 2500 | |
1760 | ||
levels of protection IP30,IP40 | ||
generatrix | 3 phase 4 wire system | A,B,C,PE,N |
3 phase 5 wire system | A,B,C,PE,N | |
Regular service conditions
Ambient temperature:-5°C-- +40°C,daily average temperature <=+35°C, reduced capacity to run according to the actual situation.
Altitude:<=2000m
Humidity: Temparature as + 40°C,humidity not exceed 50%, a larger relative humidity is allowed at a low temperature (such as + 20°C to 90%),and temperature changes should be considered as it may cause condenssation.
Installation requirements:Ground lean gradient should be 5°or lower, and the entire Cabinet column relative flat.
Switching equipment should be installed in non-violent vibration and shock and electrical components should not be corroded by the place.
AUTOMATIC BENING MACHINE
STANDARD PACKING:
MOVABLE TEST EQUIPEMENT:
NEC AUTOMATIC CUT&PUNCH&BENDING MACHINE
STANDARD CONNECTION & SCHEINER BREAKER,ABB , HONGDA
medium voltage switchgear
